Iot Blog

Meter PZEM-004 + ESP8266 Platform IoT Blynk App

The application worked excellent without any problem, as long as the correct reading of the meter is guaranteed, the visualization in Blynk will not be affected

10 PCBs Professionals with Seeed Studio Fusion ESP-LoRa Prototypes

onTutorial Amplifier Audio PAM8302A ESP8266 Node-RED MQTT

Introduction and Create account in Platform The Things Network IoT LoRaWAN

Electricity consumption meter Peacefair PZEM 004 + ESP8266 Arduino Nano

TrialCommand Industrial Integrations

Comparison Measurements Peacefair Power PZEM 004 VS Chint DDS666 ESP8266

Introduction and Create account in Platform The Things Network IoT LoRaWAN

onWeb Server Scada SVG ESP8266 Random value with 6V Battery

For the sending to the Blynk platform,8 virtual writing variableshave been created, and the data is sentevery 10 seconds.

You must belogged into post a comment.

Initially it is required to download the App to our device:

Features, Arduino connections and ESP8266.

10 PCBs Professionals with Seeed Studio Fusion ESP-LoRa Prototypes

A few days ago I finished tests on my breadboard, being positive

If you want to know more about PeacefairsPzem-004 meter, I recommend the following tutorial:

PDAControl started as a hobby and grew to a more complete testing space and better documentation,Without considering these useful contributions or simply want to contribute to keep growing – here a link.

Voltage transformers for insulation

If you want to know more about Blynk I recommend the following tutorial:

AllBlynkESP8266IoTMeasurement Electric ConsumptionProjects

Comparison Measurements Peacefair Power PZEM 004 VS Chint DDS666 ESP8266

The resistance consumes approximately895 Watts.

Materials and where to buy them very cheap !!

Arduino + ESP8266 + Software Opto22 example Scada Industrial – PDAControl

We will measure the electrical consumption of a resistor to heat water, consume approximately870 Wattsand visualize the measurements in a dashboard.

onInstallation node Modbus TCP Node Red

Share & Learn Programming Design Automation & Control

Note: Detailed information about Blynk

Monophasic Electric Consumption Meters Per Pulse

The routine created in Arduino IDE,esp8266performs the reading of themeter pzem-004through the serial port.

Update HTTPS Redirect Version 2.0 ESP8266 Google Spreadsheets

Immersion heater / Resistance Water heater

Meter PZEM-004 + ESP8266 Platform IoT Node-RED Modbus TCP/IP

Introduction Platform IoT Blynk ESP8266

Note:Download and/or github links below.

Installation KiCad in Ubuntu and Windows

Keep in mind that the creation of Widgets in blynk works with something calledEnergyor energy units, initially you have2000 units, you must take into account the cost of each widget created, the value is below namethe example Button $ 200.

In general there was no major complication, this is only a basic test, in future integrations with Blynk derived from this project we could perform:

10 PCBs Professionals with Seeed Studio Fusion ESP-LoRa Prototypes

ESP8266 IRCControl from Internet IoT v1.0 Part 1

In this opportunity we will integrate our active power meter or electric consumption,Peacefair Pzem-004with theIoT Blynk app platformavailable inAndroid&iOSapps stores using anESP8266module, later we will create a dashboard to visualize the 4 available variables asactive power, accumulated electrical consumption, voltage and current.

In this opportunity we will create an account in the platform The

Introduction LoRa Module RFM95 Hoperf

We have previously performed tests with 2 active power meters. In this

Introduction and Create account in Platform The Things Network IoT LoRaWAN

When creating the project in the App Blynk automatically generates the connectionTOKENfor the  arduino IDE code, theTOKENis automaticallysent to the email with which they were previously registered in the Blynk platform.

Create account, configuration and basic connection, exampleesp8266.

Controllers PLCS PACS

onArduino Mega 2560 Oled Display I2C Master Modbus RTU Scada Industrial Connection

Update HTTPS Redirect Version 2.0 ESP8266 Google Spreadsheets

Meter PZEM 004T & Three phase meters

Communication LoRa ESP8266 Radio RFM95 1

Example Arduino IDE: PZEM-ESP8266-blynk

Meter PZEM-004 + ESP8266 Platform IoT Blynk App

Blynkconnectingesp8266iotPowerpzem 004pzem-004 blynkpzem-004 esp8266pzem-004tRecent

Tutorial ESP8266 Control Servo Node-RED MQTT (Mosquitto) IoT 2 – PDAControl

Meter PZEM-004 + ESP8266 Platform IoT Blynk App

Controllers PLCS PACS

MPPT Controller Regulator for solar panel

Meter PZEM-004 + ESP8266 Platform IoT Node-RED Modbus TCP/IP

ESP8266 IRCControl from Internet IoT v1.0 Part 1

Comparison Measurements Peacefair Power PZEM 004 VS Chint DDS666 ESP8266

Meter PZEM-004 + ESP8266 Platform IoT Blynk App

Introduction LoRa Module RFM95 Hoperf

Note:If you plan to make a complete or permanent connection application withBlynkyou should consider the general questions and terms attached.

ESP8266 Scada SVG Modbus RTU Slave Serial – PDAControl

TrialCommand Industrial Integrations

Exit mobile version